Know Your MOT
19.1%fail rate

Talbot Super Minx common MOT failures and failure rate

What a Talbot Super Minx fails its MOT on, from real DVSA test data, and the part that resolves each item.

Based on 157 MOT tests in DVSA data.

About 19.1% of MOT tests recorded on the Talbot Super Minx in DVSA data end in a failure. The same handful of items account for most of them.

Its most common failure is brakes, which makes up 56.7% of the Talbot Super Minx's failures, followed by brakes, suspension, other, lamps & electrical. Each item below links to the part that resolves it. Confirm the exact fitment against your registration or VIN before buying, and have safety-critical work done by a competent mechanic.

What it fails on, and why

Brakes56.7% of failures

Brake failures cover worn pads and discs, an imbalance between wheels, corroded or scored discs, or a binding caliper. Braking efficiency is measured on a rolling road, so a spongy or pulling brake shows up as a low reading.

Suspension26.7% of failures

Suspension failures usually mean a worn or snapped coil spring, a leaking shock absorber, or play in a lower arm ball joint or bush. The tester checks for corrosion, fractures and excessive movement. A broken front spring is one of the most common failures on higher-mileage cars and is a straightforward replacement.

Other23.3% of failures

This covers a range of smaller items, from a non-working horn to a warning light left on.

Lamps & electrical20.0% of failures

Lighting is the single most common MOT failure and the cheapest to put right. A blown headlight, brake-light or number-plate bulb, a cracked lens, or a headlamp beam that points too high or low will all fail. Most are a two-minute bulb swap.

Exhaust & emissions20.0% of failures

Exhaust failures cover leaks, insecure mountings and emissions over the limit. A blowing exhaust, a failed lambda reading or a diesel that smokes beyond the limit will fail.

Seat belts10.0% of failures

Seat-belt failures are frays, cuts, corroded anchorages, or a belt that will not lock under a sharp pull or retract properly.

The parts that fix each

If your car has just failed, you have 10 working days to fix the items and get a free partial retest. These are the usual parts; confirm the exact fitment against your registration or VIN before buying.

For the brakes failure: Talbot Super Minx brake pads and discsSearch Amazon for Talbot Super Minx brake pads and discsaffiliate searchFind Talbot Super Minx brake pads and discs on eBayaffiliate
For the suspension failure: Talbot Super Minx suspension springs and shock absorbersSearch Amazon for Talbot Super Minx suspension springs and shock absorbersaffiliate searchFind Talbot Super Minx suspension springs and shock absorbers on eBayaffiliate
For the lamps & electrical failure: Talbot Super Minx headlight and indicator bulbsSearch Amazon for Talbot Super Minx headlight and indicator bulbsaffiliate searchFind Talbot Super Minx headlight and indicator bulbs on eBayaffiliate
For the exhaust & emissions failure: Talbot Super Minx exhaustSearch Amazon for Talbot Super Minx exhaustaffiliate searchFind Talbot Super Minx exhaust on eBayaffiliate
For the seat belts failure: Talbot Super Minx seat beltsSearch Amazon for Talbot Super Minx seat beltsaffiliate searchFind Talbot Super Minx seat belts on eBayaffiliate

Other models

Talbot Express MOT failures34.3% failure rateTalbot Sunbeam MOT failures17.6% failure rateTalbot Camper MOT failures35.8% failure rateFord Fiesta MOT failures27.1% failure rate

Sources: DVSA MOT History API: MOT test results and defect data ยท DVSA MOT testing data for Great Britain