Know Your MOT
38.1%fail rate

Subaru 18l common MOT failures and failure rate

What a Subaru 18l fails its MOT on, from real DVSA test data, and the part that resolves each item.

Based on 63 MOT tests in DVSA data.

About 38.1% of MOT tests recorded on the Subaru 18l in DVSA data end in a failure. The same handful of items account for most of them.

Its most common failure is suspension, which makes up 54.2% of the Subaru 18l's failures, followed by suspension, body & structure, seat belts, other. Each item below links to the part that resolves it. Confirm the exact fitment against your registration or VIN before buying, and have safety-critical work done by a competent mechanic.

What it fails on, and why

Suspension54.2% of failures

Suspension failures usually mean a worn or snapped coil spring, a leaking shock absorber, or play in a lower arm ball joint or bush. The tester checks for corrosion, fractures and excessive movement. A broken front spring is one of the most common failures on higher-mileage cars and is a straightforward replacement.

Body & structure41.7% of failures

Structural failures are corrosion in load-bearing areas, sharp edges, or insecure panels. These are inspection-and-welding jobs rather than a simple bolt-on part, so weigh them against the value of the car.

Seat belts37.5% of failures

Seat-belt failures are frays, cuts, corroded anchorages, or a belt that will not lock under a sharp pull or retract properly.

Other37.5% of failures

This covers a range of smaller items, from a non-working horn to a warning light left on.

Brakes29.2% of failures

Brake failures cover worn pads and discs, an imbalance between wheels, corroded or scored discs, or a binding caliper. Braking efficiency is measured on a rolling road, so a spongy or pulling brake shows up as a low reading.

Tyres25.0% of failures

Tyres fail for tread below the 1.6mm legal limit across the central three-quarters, uneven or exposed-cord wear, or sidewall damage. The tester inspects all four; a single illegal tyre is a fail.

The parts that fix each

If your car has just failed, you have 10 working days to fix the items and get a free partial retest. These are the usual parts; confirm the exact fitment against your registration or VIN before buying.

For the suspension failure: Subaru 18l suspension springs and shock absorbersSearch Amazon for Subaru 18l suspension springs and shock absorbersaffiliate searchFind Subaru 18l suspension springs and shock absorbers on eBayaffiliate
For the seat belts failure: Subaru 18l seat beltsSearch Amazon for Subaru 18l seat beltsaffiliate searchFind Subaru 18l seat belts on eBayaffiliate
For the brakes failure: Subaru 18l brake pads and discsSearch Amazon for Subaru 18l brake pads and discsaffiliate searchFind Subaru 18l brake pads and discs on eBayaffiliate
For the tyres failure: Subaru 18l tyresSearch Amazon for Subaru 18l tyresaffiliate searchFind Subaru 18l tyres on eBayaffiliate

Other models

Subaru Impreza MOT failures24.4% failure rateSubaru Forester MOT failures23.6% failure rateSubaru Legacy MOT failures27.5% failure rateFord Fiesta MOT failures27.1% failure rate

Sources: DVSA MOT History API: MOT test results and defect data ยท DVSA MOT testing data for Great Britain