Know Your MOT
44.4%fail rate

SEAT Toledo Gls common MOT failures and failure rate

What a SEAT Toledo Gls fails its MOT on, from real DVSA test data, and the part that resolves each item.

Based on 63 MOT tests in DVSA data.

About 44.4% of MOT tests recorded on the SEAT Toledo Gls in DVSA data end in a failure. The same handful of items account for most of them.

Its most common failure is lamps & electrical, which makes up 71.4% of the SEAT Toledo Gls's failures, followed by lamps & electrical, brakes, exhaust & emissions, other. Each item below links to the part that resolves it. Confirm the exact fitment against your registration or VIN before buying, and have safety-critical work done by a competent mechanic.

What it fails on, and why

Lamps & electrical71.4% of failures

Lighting is the single most common MOT failure and the cheapest to put right. A blown headlight, brake-light or number-plate bulb, a cracked lens, or a headlamp beam that points too high or low will all fail. Most are a two-minute bulb swap.

Brakes50.0% of failures

Brake failures cover worn pads and discs, an imbalance between wheels, corroded or scored discs, or a binding caliper. Braking efficiency is measured on a rolling road, so a spongy or pulling brake shows up as a low reading.

Exhaust & emissions42.9% of failures

Exhaust failures cover leaks, insecure mountings and emissions over the limit. A blowing exhaust, a failed lambda reading or a diesel that smokes beyond the limit will fail.

Other35.7% of failures

This covers a range of smaller items, from a non-working horn to a warning light left on.

Tyres35.7% of failures

Tyres fail for tread below the 1.6mm legal limit across the central three-quarters, uneven or exposed-cord wear, or sidewall damage. The tester inspects all four; a single illegal tyre is a fail.

Suspension32.1% of failures

Suspension failures usually mean a worn or snapped coil spring, a leaking shock absorber, or play in a lower arm ball joint or bush. The tester checks for corrosion, fractures and excessive movement. A broken front spring is one of the most common failures on higher-mileage cars and is a straightforward replacement.

The parts that fix each

If your car has just failed, you have 10 working days to fix the items and get a free partial retest. These are the usual parts; confirm the exact fitment against your registration or VIN before buying.

For the lamps & electrical failure: SEAT Toledo Gls headlight and indicator bulbsSearch Amazon for SEAT Toledo Gls headlight and indicator bulbsaffiliate searchFind SEAT Toledo Gls headlight and indicator bulbs on eBayaffiliate
For the brakes failure: SEAT Toledo Gls brake pads and discsSearch Amazon for SEAT Toledo Gls brake pads and discsaffiliate searchFind SEAT Toledo Gls brake pads and discs on eBayaffiliate
For the exhaust & emissions failure: SEAT Toledo Gls exhaustSearch Amazon for SEAT Toledo Gls exhaustaffiliate searchFind SEAT Toledo Gls exhaust on eBayaffiliate
For the tyres failure: SEAT Toledo Gls tyresSearch Amazon for SEAT Toledo Gls tyresaffiliate searchFind SEAT Toledo Gls tyres on eBayaffiliate
For the suspension failure: SEAT Toledo Gls suspension springs and shock absorbersSearch Amazon for SEAT Toledo Gls suspension springs and shock absorbersaffiliate searchFind SEAT Toledo Gls suspension springs and shock absorbers on eBayaffiliate

Other models

SEAT Ibiza MOT failures26.2% failure rateSEAT Leon MOT failures21.6% failure rateSEAT Alhambra MOT failures27.4% failure rateFord Fiesta MOT failures27.1% failure rate

Sources: DVSA MOT History API: MOT test results and defect data ยท DVSA MOT testing data for Great Britain