Know Your MOT
25.3%fail rate

Scania 93m common MOT failures and failure rate

What a Scania 93m fails its MOT on, from real DVSA test data, and the part that resolves each item.

Based on 83 MOT tests in DVSA data.

About 25.3% of MOT tests recorded on the Scania 93m in DVSA data end in a failure. The same handful of items account for most of them.

Its most common failure is exhaust & emissions, which makes up 14.3% of the Scania 93m's failures, followed by exhaust & emissions, lamps & electrical, suspension, tyres. Each item below links to the part that resolves it. Confirm the exact fitment against your registration or VIN before buying, and have safety-critical work done by a competent mechanic.

What it fails on, and why

Exhaust & emissions14.3% of failures

Exhaust failures cover leaks, insecure mountings and emissions over the limit. A blowing exhaust, a failed lambda reading or a diesel that smokes beyond the limit will fail.

Lamps & electrical4.8% of failures

Lighting is the single most common MOT failure and the cheapest to put right. A blown headlight, brake-light or number-plate bulb, a cracked lens, or a headlamp beam that points too high or low will all fail. Most are a two-minute bulb swap.

Suspension4.8% of failures

Suspension failures usually mean a worn or snapped coil spring, a leaking shock absorber, or play in a lower arm ball joint or bush. The tester checks for corrosion, fractures and excessive movement. A broken front spring is one of the most common failures on higher-mileage cars and is a straightforward replacement.

Tyres4.8% of failures

Tyres fail for tread below the 1.6mm legal limit across the central three-quarters, uneven or exposed-cord wear, or sidewall damage. The tester inspects all four; a single illegal tyre is a fail.

Brakes4.8% of failures

Brake failures cover worn pads and discs, an imbalance between wheels, corroded or scored discs, or a binding caliper. Braking efficiency is measured on a rolling road, so a spongy or pulling brake shows up as a low reading.

Other4.8% of failures

This covers a range of smaller items, from a non-working horn to a warning light left on.

The parts that fix each

If your car has just failed, you have 10 working days to fix the items and get a free partial retest. These are the usual parts; confirm the exact fitment against your registration or VIN before buying.

For the exhaust & emissions failure: Scania 93m exhaustSearch Amazon for Scania 93m exhaustaffiliate searchFind Scania 93m exhaust on eBayaffiliate
For the lamps & electrical failure: Scania 93m headlight and indicator bulbsSearch Amazon for Scania 93m headlight and indicator bulbsaffiliate searchFind Scania 93m headlight and indicator bulbs on eBayaffiliate
For the suspension failure: Scania 93m suspension springs and shock absorbersSearch Amazon for Scania 93m suspension springs and shock absorbersaffiliate searchFind Scania 93m suspension springs and shock absorbers on eBayaffiliate
For the tyres failure: Scania 93m tyresSearch Amazon for Scania 93m tyresaffiliate searchFind Scania 93m tyres on eBayaffiliate
For the brakes failure: Scania 93m brake pads and discsSearch Amazon for Scania 93m brake pads and discsaffiliate searchFind Scania 93m brake pads and discs on eBayaffiliate

Other models

Scania Unknown MOT failures11.1% failure rateScania R450 MOT failures8.4% failure rateScania R500 MOT failures16.8% failure rateFord Fiesta MOT failures27.1% failure rate

Sources: DVSA MOT History API: MOT test results and defect data ยท DVSA MOT testing data for Great Britain