Know Your MOT
38.0%fail rate

Sao Penza common MOT failures and failure rate

What a Sao Penza fails its MOT on, from real DVSA test data, and the part that resolves each item.

Based on 100 MOT tests in DVSA data.

About 38.0% of MOT tests recorded on the Sao Penza in DVSA data end in a failure. The same handful of items account for most of them.

Its most common failure is suspension, which makes up 47.4% of the Sao Penza's failures, followed by suspension, seat belts, other, steering. Each item below links to the part that resolves it. Confirm the exact fitment against your registration or VIN before buying, and have safety-critical work done by a competent mechanic.

What it fails on, and why

Suspension47.4% of failures

Suspension failures usually mean a worn or snapped coil spring, a leaking shock absorber, or play in a lower arm ball joint or bush. The tester checks for corrosion, fractures and excessive movement. A broken front spring is one of the most common failures on higher-mileage cars and is a straightforward replacement.

Seat belts42.1% of failures

Seat-belt failures are frays, cuts, corroded anchorages, or a belt that will not lock under a sharp pull or retract properly.

Other34.2% of failures

This covers a range of smaller items, from a non-working horn to a warning light left on.

Steering34.2% of failures

Steering faults are typically worn track-rod ends or ball joints, play in the rack, or a split gaiter letting grease out and dirt in. Excessive free play at the wheel fails.

Brakes28.9% of failures

Brake failures cover worn pads and discs, an imbalance between wheels, corroded or scored discs, or a binding caliper. Braking efficiency is measured on a rolling road, so a spongy or pulling brake shows up as a low reading.

Body & structure23.7% of failures

Structural failures are corrosion in load-bearing areas, sharp edges, or insecure panels. These are inspection-and-welding jobs rather than a simple bolt-on part, so weigh them against the value of the car.

The parts that fix each

If your car has just failed, you have 10 working days to fix the items and get a free partial retest. These are the usual parts; confirm the exact fitment against your registration or VIN before buying.

For the suspension failure: Sao Penza suspension springs and shock absorbersSearch Amazon for Sao Penza suspension springs and shock absorbersaffiliate searchFind Sao Penza suspension springs and shock absorbers on eBayaffiliate
For the seat belts failure: Sao Penza seat beltsSearch Amazon for Sao Penza seat beltsaffiliate searchFind Sao Penza seat belts on eBayaffiliate
For the steering failure: Sao Penza steering track rod endsSearch Amazon for Sao Penza steering track rod endsaffiliate searchFind Sao Penza steering track rod ends on eBayaffiliate
For the brakes failure: Sao Penza brake pads and discsSearch Amazon for Sao Penza brake pads and discsaffiliate searchFind Sao Penza brake pads and discs on eBayaffiliate

Other models

Sao Sao MOT failures27.3% failure rateFord Fiesta MOT failures27.1% failure rateFord Focus MOT failures26.1% failure rateVauxhall Corsa MOT failures30.1% failure rate

Sources: DVSA MOT History API: MOT test results and defect data ยท DVSA MOT testing data for Great Britain