Know Your MOT
26.9%fail rate

Rover 1000 common MOT failures and failure rate

What a Rover 1000 fails its MOT on, from real DVSA test data, and the part that resolves each item.

Based on 130 MOT tests in DVSA data.

About 26.9% of MOT tests recorded on the Rover 1000 in DVSA data end in a failure. The same handful of items account for most of them.

Its most common failure is brakes, which makes up 42.9% of the Rover 1000's failures, followed by brakes, lamps & electrical, suspension, exhaust & emissions. Each item below links to the part that resolves it. Confirm the exact fitment against your registration or VIN before buying, and have safety-critical work done by a competent mechanic.

What it fails on, and why

Brakes42.9% of failures

Brake failures cover worn pads and discs, an imbalance between wheels, corroded or scored discs, or a binding caliper. Braking efficiency is measured on a rolling road, so a spongy or pulling brake shows up as a low reading.

Lamps & electrical40.0% of failures

Lighting is the single most common MOT failure and the cheapest to put right. A blown headlight, brake-light or number-plate bulb, a cracked lens, or a headlamp beam that points too high or low will all fail. Most are a two-minute bulb swap.

Suspension25.7% of failures

Suspension failures usually mean a worn or snapped coil spring, a leaking shock absorber, or play in a lower arm ball joint or bush. The tester checks for corrosion, fractures and excessive movement. A broken front spring is one of the most common failures on higher-mileage cars and is a straightforward replacement.

Exhaust & emissions25.7% of failures

Exhaust failures cover leaks, insecure mountings and emissions over the limit. A blowing exhaust, a failed lambda reading or a diesel that smokes beyond the limit will fail.

Other22.9% of failures

This covers a range of smaller items, from a non-working horn to a warning light left on.

Body & structure14.3% of failures

Structural failures are corrosion in load-bearing areas, sharp edges, or insecure panels. These are inspection-and-welding jobs rather than a simple bolt-on part, so weigh them against the value of the car.

The parts that fix each

If your car has just failed, you have 10 working days to fix the items and get a free partial retest. These are the usual parts; confirm the exact fitment against your registration or VIN before buying.

For the brakes failure: Rover 1000 brake pads and discsSearch Amazon for Rover 1000 brake pads and discsaffiliate searchFind Rover 1000 brake pads and discs on eBayaffiliate
For the lamps & electrical failure: Rover 1000 headlight and indicator bulbsSearch Amazon for Rover 1000 headlight and indicator bulbsaffiliate searchFind Rover 1000 headlight and indicator bulbs on eBayaffiliate
For the suspension failure: Rover 1000 suspension springs and shock absorbersSearch Amazon for Rover 1000 suspension springs and shock absorbersaffiliate searchFind Rover 1000 suspension springs and shock absorbers on eBayaffiliate
For the exhaust & emissions failure: Rover 1000 exhaustSearch Amazon for Rover 1000 exhaustaffiliate searchFind Rover 1000 exhaust on eBayaffiliate

Other models

Rover 25 MOT failures27.9% failure rateRover 75 MOT failures29.3% failure rateRover 214 MOT failures32.4% failure rateFord Fiesta MOT failures27.1% failure rate

Sources: DVSA MOT History API: MOT test results and defect data ยท DVSA MOT testing data for Great Britain