Know Your MOT
12.3%fail rate

Puch M125 common MOT failures and failure rate

What a Puch M125 fails its MOT on, from real DVSA test data, and the part that resolves each item.

Based on 81 MOT tests in DVSA data.

About 12.3% of MOT tests recorded on the Puch M125 in DVSA data end in a failure. The same handful of items account for most of them.

Its most common failure is steering, which makes up 10.0% of the Puch M125's failures, followed by steering, suspension, tyres, fuel system. Each item below links to the part that resolves it. Confirm the exact fitment against your registration or VIN before buying, and have safety-critical work done by a competent mechanic.

What it fails on, and why

Steering10.0% of failures

Steering faults are typically worn track-rod ends or ball joints, play in the rack, or a split gaiter letting grease out and dirt in. Excessive free play at the wheel fails.

Suspension10.0% of failures

Suspension failures usually mean a worn or snapped coil spring, a leaking shock absorber, or play in a lower arm ball joint or bush. The tester checks for corrosion, fractures and excessive movement. A broken front spring is one of the most common failures on higher-mileage cars and is a straightforward replacement.

Tyres10.0% of failures

Tyres fail for tread below the 1.6mm legal limit across the central three-quarters, uneven or exposed-cord wear, or sidewall damage. The tester inspects all four; a single illegal tyre is a fail.

Fuel system10.0% of failures

Fuel-system failures are leaks or an insecure filler cap.

Other10.0% of failures

This covers a range of smaller items, from a non-working horn to a warning light left on.

Brakes10.0% of failures

Brake failures cover worn pads and discs, an imbalance between wheels, corroded or scored discs, or a binding caliper. Braking efficiency is measured on a rolling road, so a spongy or pulling brake shows up as a low reading.

The parts that fix each

If your car has just failed, you have 10 working days to fix the items and get a free partial retest. These are the usual parts; confirm the exact fitment against your registration or VIN before buying.

For the steering failure: Puch M125 steering track rod endsSearch Amazon for Puch M125 steering track rod endsaffiliate searchFind Puch M125 steering track rod ends on eBayaffiliate
For the suspension failure: Puch M125 suspension springs and shock absorbersSearch Amazon for Puch M125 suspension springs and shock absorbersaffiliate searchFind Puch M125 suspension springs and shock absorbers on eBayaffiliate
For the tyres failure: Puch M125 tyresSearch Amazon for Puch M125 tyresaffiliate searchFind Puch M125 tyres on eBayaffiliate
For the brakes failure: Puch M125 brake pads and discsSearch Amazon for Puch M125 brake pads and discsaffiliate searchFind Puch M125 brake pads and discs on eBayaffiliate

Other models

Puch Maxi MOT failures13.2% failure ratePuch Unknown MOT failures11.0% failure ratePuch Moped MOT failures11.3% failure rateFord Fiesta MOT failures27.1% failure rate

Sources: DVSA MOT History API: MOT test results and defect data ยท DVSA MOT testing data for Great Britain