Know Your MOT
27.0%fail rate

Morris Light Van common MOT failures and failure rate

What a Morris Light Van fails its MOT on, from real DVSA test data, and the part that resolves each item.

Based on 152 MOT tests in DVSA data.

About 27.0% of MOT tests recorded on the Morris Light Van in DVSA data end in a failure. The same handful of items account for most of them.

Its most common failure is brakes, which makes up 46.3% of the Morris Light Van's failures, followed by brakes, suspension, lamps & electrical, steering. Each item below links to the part that resolves it. Confirm the exact fitment against your registration or VIN before buying, and have safety-critical work done by a competent mechanic.

What it fails on, and why

Brakes46.3% of failures

Brake failures cover worn pads and discs, an imbalance between wheels, corroded or scored discs, or a binding caliper. Braking efficiency is measured on a rolling road, so a spongy or pulling brake shows up as a low reading.

Suspension31.7% of failures

Suspension failures usually mean a worn or snapped coil spring, a leaking shock absorber, or play in a lower arm ball joint or bush. The tester checks for corrosion, fractures and excessive movement. A broken front spring is one of the most common failures on higher-mileage cars and is a straightforward replacement.

Lamps & electrical29.3% of failures

Lighting is the single most common MOT failure and the cheapest to put right. A blown headlight, brake-light or number-plate bulb, a cracked lens, or a headlamp beam that points too high or low will all fail. Most are a two-minute bulb swap.

Steering24.4% of failures

Steering faults are typically worn track-rod ends or ball joints, play in the rack, or a split gaiter letting grease out and dirt in. Excessive free play at the wheel fails.

Visibility/wipers22.0% of failures

Visibility failures include torn or smearing wiper blades, a washer jet that does not reach the screen, and chips or cracks in the driver's swept area. Blades and washer fluid are quick, cheap fixes.

Seat belts17.1% of failures

Seat-belt failures are frays, cuts, corroded anchorages, or a belt that will not lock under a sharp pull or retract properly.

The parts that fix each

If your car has just failed, you have 10 working days to fix the items and get a free partial retest. These are the usual parts; confirm the exact fitment against your registration or VIN before buying.

For the brakes failure: Morris Light Van brake pads and discsSearch Amazon for Morris Light Van brake pads and discsaffiliate searchFind Morris Light Van brake pads and discs on eBayaffiliate
For the suspension failure: Morris Light Van suspension springs and shock absorbersSearch Amazon for Morris Light Van suspension springs and shock absorbersaffiliate searchFind Morris Light Van suspension springs and shock absorbers on eBayaffiliate
For the lamps & electrical failure: Morris Light Van headlight and indicator bulbsSearch Amazon for Morris Light Van headlight and indicator bulbsaffiliate searchFind Morris Light Van headlight and indicator bulbs on eBayaffiliate
For the steering failure: Morris Light Van steering track rod endsSearch Amazon for Morris Light Van steering track rod endsaffiliate searchFind Morris Light Van steering track rod ends on eBayaffiliate
For the visibility/wipers failure: Morris Light Van wiper bladesSearch Amazon for Morris Light Van wiper bladesaffiliate searchFind Morris Light Van wiper blades on eBayaffiliate
For the seat belts failure: Morris Light Van seat beltsSearch Amazon for Morris Light Van seat beltsaffiliate searchFind Morris Light Van seat belts on eBayaffiliate

Other models

Morris Minor MOT failures27.5% failure rateMorris Minor Traveller MOT failures27.6% failure rateMorris MINI MOT failures22.3% failure rateFord Fiesta MOT failures27.1% failure rate

Sources: DVSA MOT History API: MOT test results and defect data ยท DVSA MOT testing data for Great Britain