Know Your MOT
21.7%fail rate

Mercedes Bus common MOT failures and failure rate

What a Mercedes Bus fails its MOT on, from real DVSA test data, and the part that resolves each item.

Based on 810 MOT tests in DVSA data.

About 21.7% of MOT tests recorded on the Mercedes Bus in DVSA data end in a failure. The same handful of items account for most of them.

Its most common failure is brakes, which makes up 34.1% of the Mercedes Bus's failures, followed by brakes, lamps & electrical, other, tyres. Each item below links to the part that resolves it. Confirm the exact fitment against your registration or VIN before buying, and have safety-critical work done by a competent mechanic.

What it fails on, and why

Brakes34.1% of failures

Brake failures cover worn pads and discs, an imbalance between wheels, corroded or scored discs, or a binding caliper. Braking efficiency is measured on a rolling road, so a spongy or pulling brake shows up as a low reading.

Lamps & electrical26.7% of failures

Lighting is the single most common MOT failure and the cheapest to put right. A blown headlight, brake-light or number-plate bulb, a cracked lens, or a headlamp beam that points too high or low will all fail. Most are a two-minute bulb swap.

Other15.3% of failures

This covers a range of smaller items, from a non-working horn to a warning light left on.

Tyres9.1% of failures

Tyres fail for tread below the 1.6mm legal limit across the central three-quarters, uneven or exposed-cord wear, or sidewall damage. The tester inspects all four; a single illegal tyre is a fail.

Suspension8.5% of failures

Suspension failures usually mean a worn or snapped coil spring, a leaking shock absorber, or play in a lower arm ball joint or bush. The tester checks for corrosion, fractures and excessive movement. A broken front spring is one of the most common failures on higher-mileage cars and is a straightforward replacement.

Seat belts8.0% of failures

Seat-belt failures are frays, cuts, corroded anchorages, or a belt that will not lock under a sharp pull or retract properly.

The parts that fix each

If your car has just failed, you have 10 working days to fix the items and get a free partial retest. These are the usual parts; confirm the exact fitment against your registration or VIN before buying.

For the brakes failure: Mercedes Bus brake pads and discsSearch Amazon for Mercedes Bus brake pads and discsaffiliate searchFind Mercedes Bus brake pads and discs on eBayaffiliate
For the lamps & electrical failure: Mercedes Bus headlight and indicator bulbsSearch Amazon for Mercedes Bus headlight and indicator bulbsaffiliate searchFind Mercedes Bus headlight and indicator bulbs on eBayaffiliate
For the tyres failure: Mercedes Bus tyresSearch Amazon for Mercedes Bus tyresaffiliate searchFind Mercedes Bus tyres on eBayaffiliate
For the suspension failure: Mercedes Bus suspension springs and shock absorbersSearch Amazon for Mercedes Bus suspension springs and shock absorbersaffiliate searchFind Mercedes Bus suspension springs and shock absorbers on eBayaffiliate
For the seat belts failure: Mercedes Bus seat beltsSearch Amazon for Mercedes Bus seat beltsaffiliate searchFind Mercedes Bus seat belts on eBayaffiliate

Other models

Mercedes Ml MOT failures21.9% failure rateMercedes Motorhome MOT failures23.4% failure rateMercedes Unknown MOT failures20.7% failure rateFord Fiesta MOT failures27.1% failure rate

Sources: DVSA MOT History API: MOT test results and defect data ยท DVSA MOT testing data for Great Britain