Know Your MOT
22.5%fail rate

Mazda Az1 common MOT failures and failure rate

What a Mazda Az1 fails its MOT on, from real DVSA test data, and the part that resolves each item.

Based on 89 MOT tests in DVSA data.

About 22.5% of MOT tests recorded on the Mazda Az1 in DVSA data end in a failure. The same handful of items account for most of them.

Its most common failure is lamps & electrical, which makes up 60.0% of the Mazda Az1's failures, followed by lamps & electrical, exhaust & emissions, tyres, visibility/wipers. Each item below links to the part that resolves it. Confirm the exact fitment against your registration or VIN before buying, and have safety-critical work done by a competent mechanic.

What it fails on, and why

Lamps & electrical60.0% of failures

Lighting is the single most common MOT failure and the cheapest to put right. A blown headlight, brake-light or number-plate bulb, a cracked lens, or a headlamp beam that points too high or low will all fail. Most are a two-minute bulb swap.

Exhaust & emissions35.0% of failures

Exhaust failures cover leaks, insecure mountings and emissions over the limit. A blowing exhaust, a failed lambda reading or a diesel that smokes beyond the limit will fail.

Tyres15.0% of failures

Tyres fail for tread below the 1.6mm legal limit across the central three-quarters, uneven or exposed-cord wear, or sidewall damage. The tester inspects all four; a single illegal tyre is a fail.

Visibility/wipers15.0% of failures

Visibility failures include torn or smearing wiper blades, a washer jet that does not reach the screen, and chips or cracks in the driver's swept area. Blades and washer fluid are quick, cheap fixes.

Brakes10.0% of failures

Brake failures cover worn pads and discs, an imbalance between wheels, corroded or scored discs, or a binding caliper. Braking efficiency is measured on a rolling road, so a spongy or pulling brake shows up as a low reading.

Seat belts5.0% of failures

Seat-belt failures are frays, cuts, corroded anchorages, or a belt that will not lock under a sharp pull or retract properly.

The parts that fix each

If your car has just failed, you have 10 working days to fix the items and get a free partial retest. These are the usual parts; confirm the exact fitment against your registration or VIN before buying.

For the lamps & electrical failure: Mazda Az1 headlight and indicator bulbsSearch Amazon for Mazda Az1 headlight and indicator bulbsaffiliate searchFind Mazda Az1 headlight and indicator bulbs on eBayaffiliate
For the exhaust & emissions failure: Mazda Az1 exhaustSearch Amazon for Mazda Az1 exhaustaffiliate searchFind Mazda Az1 exhaust on eBayaffiliate
For the tyres failure: Mazda Az1 tyresSearch Amazon for Mazda Az1 tyresaffiliate searchFind Mazda Az1 tyres on eBayaffiliate
For the visibility/wipers failure: Mazda Az1 wiper bladesSearch Amazon for Mazda Az1 wiper bladesaffiliate searchFind Mazda Az1 wiper blades on eBayaffiliate
For the brakes failure: Mazda Az1 brake pads and discsSearch Amazon for Mazda Az1 brake pads and discsaffiliate searchFind Mazda Az1 brake pads and discs on eBayaffiliate
For the seat belts failure: Mazda Az1 seat beltsSearch Amazon for Mazda Az1 seat beltsaffiliate searchFind Mazda Az1 seat belts on eBayaffiliate

Other models

Mazda Mx-5 MOT failures23.4% failure rateMazda 3 MOT failures22.4% failure rateMazda 2 MOT failures21.4% failure rateFord Fiesta MOT failures27.1% failure rate

Sources: DVSA MOT History API: MOT test results and defect data ยท DVSA MOT testing data for Great Britain