Know Your MOT
9.7%fail rate

Laverda 1200 common MOT failures and failure rate

What a Laverda 1200 fails its MOT on, from real DVSA test data, and the part that resolves each item.

Based on 534 MOT tests in DVSA data.

About 9.7% of MOT tests recorded on the Laverda 1200 in DVSA data end in a failure. The same handful of items account for most of them.

Its most common failure is brakes, which makes up 28.8% of the Laverda 1200's failures, followed by brakes, lamps & electrical, other, tyres. Each item below links to the part that resolves it. Confirm the exact fitment against your registration or VIN before buying, and have safety-critical work done by a competent mechanic.

What it fails on, and why

Brakes28.8% of failures

Brake failures cover worn pads and discs, an imbalance between wheels, corroded or scored discs, or a binding caliper. Braking efficiency is measured on a rolling road, so a spongy or pulling brake shows up as a low reading.

Lamps & electrical21.2% of failures

Lighting is the single most common MOT failure and the cheapest to put right. A blown headlight, brake-light or number-plate bulb, a cracked lens, or a headlamp beam that points too high or low will all fail. Most are a two-minute bulb swap.

Other7.7% of failures

This covers a range of smaller items, from a non-working horn to a warning light left on.

Tyres5.8% of failures

Tyres fail for tread below the 1.6mm legal limit across the central three-quarters, uneven or exposed-cord wear, or sidewall damage. The tester inspects all four; a single illegal tyre is a fail.

Suspension5.8% of failures

Suspension failures usually mean a worn or snapped coil spring, a leaking shock absorber, or play in a lower arm ball joint or bush. The tester checks for corrosion, fractures and excessive movement. A broken front spring is one of the most common failures on higher-mileage cars and is a straightforward replacement.

Steering1.9% of failures

Steering faults are typically worn track-rod ends or ball joints, play in the rack, or a split gaiter letting grease out and dirt in. Excessive free play at the wheel fails.

The parts that fix each

If your car has just failed, you have 10 working days to fix the items and get a free partial retest. These are the usual parts; confirm the exact fitment against your registration or VIN before buying.

For the brakes failure: Laverda 1200 brake pads and discsSearch Amazon for Laverda 1200 brake pads and discsaffiliate searchFind Laverda 1200 brake pads and discs on eBayaffiliate
For the lamps & electrical failure: Laverda 1200 headlight and indicator bulbsSearch Amazon for Laverda 1200 headlight and indicator bulbsaffiliate searchFind Laverda 1200 headlight and indicator bulbs on eBayaffiliate
For the tyres failure: Laverda 1200 tyresSearch Amazon for Laverda 1200 tyresaffiliate searchFind Laverda 1200 tyres on eBayaffiliate
For the suspension failure: Laverda 1200 suspension springs and shock absorbersSearch Amazon for Laverda 1200 suspension springs and shock absorbersaffiliate searchFind Laverda 1200 suspension springs and shock absorbers on eBayaffiliate
For the steering failure: Laverda 1200 steering track rod endsSearch Amazon for Laverda 1200 steering track rod endsaffiliate searchFind Laverda 1200 steering track rod ends on eBayaffiliate

Other models

Laverda Jota MOT failures9.8% failure rateLaverda 750 MOT failures14.2% failure rateLaverda Rgs MOT failures8.9% failure rateFord Fiesta MOT failures27.1% failure rate

Sources: DVSA MOT History API: MOT test results and defect data ยท DVSA MOT testing data for Great Britain