27.1%fail rate

Land Rover 90 Pick common MOT failures and failure rate

What a Land Rover 90 Pick fails its MOT on, from real DVSA test data, and the part that resolves each item.

Based on 70 MOT tests in DVSA data.

About 27.1% of MOT tests recorded on the Land Rover 90 Pick in DVSA data end in a failure. The same handful of items account for most of them.

Its most common failure is lamps & electrical, which makes up 47.4% of the Land Rover 90 Pick's failures, followed by lamps & electrical, suspension, brakes, exhaust & emissions. Each item below links to the part that resolves it. Confirm the exact fitment against your registration or VIN before buying, and have safety-critical work done by a competent mechanic.

What it fails on, and why

Lamps & electrical47.4% of failures

Lighting is the single most common MOT failure and the cheapest to put right. A blown headlight, brake-light or number-plate bulb, a cracked lens, or a headlamp beam that points too high or low will all fail. Most are a two-minute bulb swap.

Suspension31.6% of failures

Suspension failures usually mean a worn or snapped coil spring, a leaking shock absorber, or play in a lower arm ball joint or bush. The tester checks for corrosion, fractures and excessive movement. A broken front spring is one of the most common failures on higher-mileage cars and is a straightforward replacement.

Brakes26.3% of failures

Brake failures cover worn pads and discs, an imbalance between wheels, corroded or scored discs, or a binding caliper. Braking efficiency is measured on a rolling road, so a spongy or pulling brake shows up as a low reading.

Exhaust & emissions21.1% of failures

Exhaust failures cover leaks, insecure mountings and emissions over the limit. A blowing exhaust, a failed lambda reading or a diesel that smokes beyond the limit will fail.

Body & structure21.1% of failures

Structural failures are corrosion in load-bearing areas, sharp edges, or insecure panels. These are inspection-and-welding jobs rather than a simple bolt-on part, so weigh them against the value of the car.

Visibility/wipers21.1% of failures

Visibility failures include torn or smearing wiper blades, a washer jet that does not reach the screen, and chips or cracks in the driver's swept area. Blades and washer fluid are quick, cheap fixes.

The parts that fix each

If your car has just failed, you have 10 working days to fix the items and get a free partial retest. These are the usual parts; confirm the exact fitment against your registration or VIN before buying.

For the lamps & electrical failure: Land Rover 90 Pick headlight and indicator bulbsSearch Amazon for Land Rover 90 Pick headlight and indicator bulbsaffiliate search Find Land Rover 90 Pick headlight and indicator bulbs on eBayaffiliate

For the suspension failure: Land Rover 90 Pick suspension springs and shock absorbersSearch Amazon for Land Rover 90 Pick suspension springs and shock absorbersaffiliate search Find Land Rover 90 Pick suspension springs and shock absorbers on eBayaffiliate

For the brakes failure: Land Rover 90 Pick brake pads and discsSearch Amazon for Land Rover 90 Pick brake pads and discsaffiliate search Find Land Rover 90 Pick brake pads and discs on eBayaffiliate

For the exhaust & emissions failure: Land Rover 90 Pick exhaustSearch Amazon for Land Rover 90 Pick exhaustaffiliate search Find Land Rover 90 Pick exhaust on eBayaffiliate

For the visibility/wipers failure: Land Rover 90 Pick wiper bladesSearch Amazon for Land Rover 90 Pick wiper bladesaffiliate search Find Land Rover 90 Pick wiper blades on eBayaffiliate

Other models

Land Rover Range Rover MOT failures18.6% failure rate Land Rover Discovery MOT failures25.3% failure rate Land Rover Freelander MOT failures25.3% failure rate Ford Fiesta MOT failures27.1% failure rate

Sources: DVSA MOT History API: MOT test results and defect data · DVSA MOT testing data for Great Britain