Know Your MOT
14.5%fail rate

Kawasaki Er6-F common MOT failures and failure rate

What a Kawasaki Er6-F fails its MOT on, from real DVSA test data, and the part that resolves each item.

Based on 221 MOT tests in DVSA data.

About 14.5% of MOT tests recorded on the Kawasaki Er6-F in DVSA data end in a failure. The same handful of items account for most of them.

Its most common failure is lamps & electrical, which makes up 25.0% of the Kawasaki Er6-F's failures, followed by lamps & electrical, tyres, other, exhaust & emissions. Each item below links to the part that resolves it. Confirm the exact fitment against your registration or VIN before buying, and have safety-critical work done by a competent mechanic.

What it fails on, and why

Lamps & electrical25.0% of failures

Lighting is the single most common MOT failure and the cheapest to put right. A blown headlight, brake-light or number-plate bulb, a cracked lens, or a headlamp beam that points too high or low will all fail. Most are a two-minute bulb swap.

Tyres21.9% of failures

Tyres fail for tread below the 1.6mm legal limit across the central three-quarters, uneven or exposed-cord wear, or sidewall damage. The tester inspects all four; a single illegal tyre is a fail.

Other12.5% of failures

This covers a range of smaller items, from a non-working horn to a warning light left on.

Exhaust & emissions12.5% of failures

Exhaust failures cover leaks, insecure mountings and emissions over the limit. A blowing exhaust, a failed lambda reading or a diesel that smokes beyond the limit will fail.

Brakes9.4% of failures

Brake failures cover worn pads and discs, an imbalance between wheels, corroded or scored discs, or a binding caliper. Braking efficiency is measured on a rolling road, so a spongy or pulling brake shows up as a low reading.

Suspension6.2% of failures

Suspension failures usually mean a worn or snapped coil spring, a leaking shock absorber, or play in a lower arm ball joint or bush. The tester checks for corrosion, fractures and excessive movement. A broken front spring is one of the most common failures on higher-mileage cars and is a straightforward replacement.

The parts that fix each

If your car has just failed, you have 10 working days to fix the items and get a free partial retest. These are the usual parts; confirm the exact fitment against your registration or VIN before buying.

For the lamps & electrical failure: Kawasaki Er6-F headlight and indicator bulbsSearch Amazon for Kawasaki Er6-F headlight and indicator bulbsaffiliate searchFind Kawasaki Er6-F headlight and indicator bulbs on eBayaffiliate
For the tyres failure: Kawasaki Er6-F tyresSearch Amazon for Kawasaki Er6-F tyresaffiliate searchFind Kawasaki Er6-F tyres on eBayaffiliate
For the exhaust & emissions failure: Kawasaki Er6-F exhaustSearch Amazon for Kawasaki Er6-F exhaustaffiliate searchFind Kawasaki Er6-F exhaust on eBayaffiliate
For the brakes failure: Kawasaki Er6-F brake pads and discsSearch Amazon for Kawasaki Er6-F brake pads and discsaffiliate searchFind Kawasaki Er6-F brake pads and discs on eBayaffiliate
For the suspension failure: Kawasaki Er6-F suspension springs and shock absorbersSearch Amazon for Kawasaki Er6-F suspension springs and shock absorbersaffiliate searchFind Kawasaki Er6-F suspension springs and shock absorbers on eBayaffiliate

Other models

Kawasaki Zx MOT failures11.0% failure rateKawasaki Zx-6r MOT failures18.2% failure rateKawasaki Zr MOT failures11.5% failure rateFord Fiesta MOT failures27.1% failure rate

Sources: DVSA MOT History API: MOT test results and defect data ยท DVSA MOT testing data for Great Britain