Know Your MOT
24.8%fail rate

Kawasaki Bn125-A3 common MOT failures and failure rate

What a Kawasaki Bn125-A3 fails its MOT on, from real DVSA test data, and the part that resolves each item.

Based on 113 MOT tests in DVSA data.

About 24.8% of MOT tests recorded on the Kawasaki Bn125-A3 in DVSA data end in a failure. The same handful of items account for most of them.

Its most common failure is brakes, which makes up 35.7% of the Kawasaki Bn125-A3's failures, followed by brakes, other, lamps & electrical, suspension. Each item below links to the part that resolves it. Confirm the exact fitment against your registration or VIN before buying, and have safety-critical work done by a competent mechanic.

What it fails on, and why

Brakes35.7% of failures

Brake failures cover worn pads and discs, an imbalance between wheels, corroded or scored discs, or a binding caliper. Braking efficiency is measured on a rolling road, so a spongy or pulling brake shows up as a low reading.

Other32.1% of failures

This covers a range of smaller items, from a non-working horn to a warning light left on.

Lamps & electrical10.7% of failures

Lighting is the single most common MOT failure and the cheapest to put right. A blown headlight, brake-light or number-plate bulb, a cracked lens, or a headlamp beam that points too high or low will all fail. Most are a two-minute bulb swap.

Suspension10.7% of failures

Suspension failures usually mean a worn or snapped coil spring, a leaking shock absorber, or play in a lower arm ball joint or bush. The tester checks for corrosion, fractures and excessive movement. A broken front spring is one of the most common failures on higher-mileage cars and is a straightforward replacement.

Exhaust & emissions3.6% of failures

Exhaust failures cover leaks, insecure mountings and emissions over the limit. A blowing exhaust, a failed lambda reading or a diesel that smokes beyond the limit will fail.

Registration plate3.6% of failures

A missing, damaged, dirty or incorrectly-spaced number plate, or one using the wrong font, will fail. A replacement plate is inexpensive.

The parts that fix each

If your car has just failed, you have 10 working days to fix the items and get a free partial retest. These are the usual parts; confirm the exact fitment against your registration or VIN before buying.

For the brakes failure: Kawasaki Bn125-A3 brake pads and discsSearch Amazon for Kawasaki Bn125-A3 brake pads and discsaffiliate searchFind Kawasaki Bn125-A3 brake pads and discs on eBayaffiliate
For the lamps & electrical failure: Kawasaki Bn125-A3 headlight and indicator bulbsSearch Amazon for Kawasaki Bn125-A3 headlight and indicator bulbsaffiliate searchFind Kawasaki Bn125-A3 headlight and indicator bulbs on eBayaffiliate
For the suspension failure: Kawasaki Bn125-A3 suspension springs and shock absorbersSearch Amazon for Kawasaki Bn125-A3 suspension springs and shock absorbersaffiliate searchFind Kawasaki Bn125-A3 suspension springs and shock absorbers on eBayaffiliate
For the exhaust & emissions failure: Kawasaki Bn125-A3 exhaustSearch Amazon for Kawasaki Bn125-A3 exhaustaffiliate searchFind Kawasaki Bn125-A3 exhaust on eBayaffiliate
For the registration plate failure: Kawasaki Bn125-A3 number plateSearch Amazon for Kawasaki Bn125-A3 number plateaffiliate searchFind Kawasaki Bn125-A3 number plate on eBayaffiliate

Other models

Kawasaki Zx MOT failures11.0% failure rateKawasaki Zx-6r MOT failures18.2% failure rateKawasaki Zr MOT failures11.5% failure rateFord Fiesta MOT failures27.1% failure rate

Sources: DVSA MOT History API: MOT test results and defect data ยท DVSA MOT testing data for Great Britain