Know Your MOT
17.0%fail rate

Jensen Interseptor common MOT failures and failure rate

What a Jensen Interseptor fails its MOT on, from real DVSA test data, and the part that resolves each item.

Based on 94 MOT tests in DVSA data.

About 17.0% of MOT tests recorded on the Jensen Interseptor in DVSA data end in a failure. The same handful of items account for most of them.

Its most common failure is lamps & electrical, which makes up 37.5% of the Jensen Interseptor's failures, followed by lamps & electrical, brakes, seat belts, other. Each item below links to the part that resolves it. Confirm the exact fitment against your registration or VIN before buying, and have safety-critical work done by a competent mechanic.

What it fails on, and why

Lamps & electrical37.5% of failures

Lighting is the single most common MOT failure and the cheapest to put right. A blown headlight, brake-light or number-plate bulb, a cracked lens, or a headlamp beam that points too high or low will all fail. Most are a two-minute bulb swap.

Brakes31.2% of failures

Brake failures cover worn pads and discs, an imbalance between wheels, corroded or scored discs, or a binding caliper. Braking efficiency is measured on a rolling road, so a spongy or pulling brake shows up as a low reading.

Seat belts18.8% of failures

Seat-belt failures are frays, cuts, corroded anchorages, or a belt that will not lock under a sharp pull or retract properly.

Other12.5% of failures

This covers a range of smaller items, from a non-working horn to a warning light left on.

Visibility/wipers12.5% of failures

Visibility failures include torn or smearing wiper blades, a washer jet that does not reach the screen, and chips or cracks in the driver's swept area. Blades and washer fluid are quick, cheap fixes.

Suspension12.5% of failures

Suspension failures usually mean a worn or snapped coil spring, a leaking shock absorber, or play in a lower arm ball joint or bush. The tester checks for corrosion, fractures and excessive movement. A broken front spring is one of the most common failures on higher-mileage cars and is a straightforward replacement.

The parts that fix each

If your car has just failed, you have 10 working days to fix the items and get a free partial retest. These are the usual parts; confirm the exact fitment against your registration or VIN before buying.

For the lamps & electrical failure: Jensen Interseptor headlight and indicator bulbsSearch Amazon for Jensen Interseptor headlight and indicator bulbsaffiliate searchFind Jensen Interseptor headlight and indicator bulbs on eBayaffiliate
For the brakes failure: Jensen Interseptor brake pads and discsSearch Amazon for Jensen Interseptor brake pads and discsaffiliate searchFind Jensen Interseptor brake pads and discs on eBayaffiliate
For the seat belts failure: Jensen Interseptor seat beltsSearch Amazon for Jensen Interseptor seat beltsaffiliate searchFind Jensen Interseptor seat belts on eBayaffiliate
For the visibility/wipers failure: Jensen Interseptor wiper bladesSearch Amazon for Jensen Interseptor wiper bladesaffiliate searchFind Jensen Interseptor wiper blades on eBayaffiliate
For the suspension failure: Jensen Interseptor suspension springs and shock absorbersSearch Amazon for Jensen Interseptor suspension springs and shock absorbersaffiliate searchFind Jensen Interseptor suspension springs and shock absorbers on eBayaffiliate

Other models

Jensen Interceptor MOT failures18.9% failure rateJensen Jensen-Healey MOT failures25.2% failure rateJensen Interceptor Iii MOT failures20.8% failure rateFord Fiesta MOT failures27.1% failure rate

Sources: DVSA MOT History API: MOT test results and defect data ยท DVSA MOT testing data for Great Britain