Iveco 35/12 MOT failure rate
What a Iveco 35/12 fails its MOT on, and the part that fixes each.
About 26.6% of Iveco 35/12s fail their MOT, most often on brakes, lamps & electrical, suspension, body & structure. Confirm any part against your registration or VIN before buying, and have safety-critical work done by a competent mechanic.
What it fails on, and why
Brake failures cover worn pads and discs, an imbalance between wheels, corroded or scored discs, or a binding caliper. Braking efficiency is measured on a rolling road, so a spongy or pulling brake shows up as a low reading.
Lighting is the single most common MOT failure and the cheapest to put right. A blown headlight, brake-light or number-plate bulb, a cracked lens, or a headlamp beam that points too high or low will all fail. Most are a two-minute bulb swap.
Suspension failures usually mean a worn or snapped coil spring, a leaking shock absorber, or play in a lower arm ball joint or bush. The tester checks for corrosion, fractures and excessive movement. A broken front spring is one of the most common failures on higher-mileage cars and is a straightforward replacement.
Structural failures are corrosion in load-bearing areas, sharp edges, or insecure panels. These are inspection-and-welding jobs rather than a simple bolt-on part, so weigh them against the value of the car.
Visibility failures include torn or smearing wiper blades, a washer jet that does not reach the screen, and chips or cracks in the driver's swept area. Blades and washer fluid are quick, cheap fixes.
This covers a range of smaller items, from a non-working horn to a warning light left on.
The parts that fix each
If your car has just failed, you have 10 working days to fix the items and get a free partial retest. Confirm the exact fitment against your registration or VIN before buying.
Other models
Sources: DVSA MOT History API: MOT test results and defect data ยท DVSA MOT testing data for Great Britain