Know Your MOT
15.6%fail rate

Horwin Ek1 MOT failure rate

What a Horwin Ek1 fails its MOT on, from real DVSA test data, and the part that resolves each item.

Based on 32 MOT tests in DVSA data.

We hold 32 MOT tests for the Horwin Ek1 in the DVSA data. That is a smaller sample than our high-volume models, so treat these figures as indicative rather than definitive.

On what we have, about 15.6% fail, most often on steering, other, tyres, lamps & electrical. For a precise picture of your own car, use the registration check on the home page. Confirm any part against your registration or VIN before buying.

What it fails on, and why

Steering40.0% of failures

Steering faults are typically worn track-rod ends or ball joints, play in the rack, or a split gaiter letting grease out and dirt in. Excessive free play at the wheel fails.

Other40.0% of failures

This covers a range of smaller items, from a non-working horn to a warning light left on.

Tyres40.0% of failures

Tyres fail for tread below the 1.6mm legal limit across the central three-quarters, uneven or exposed-cord wear, or sidewall damage. The tester inspects all four; a single illegal tyre is a fail.

Lamps & electrical20.0% of failures

Lighting is the single most common MOT failure and the cheapest to put right. A blown headlight, brake-light or number-plate bulb, a cracked lens, or a headlamp beam that points too high or low will all fail. Most are a two-minute bulb swap.

Brakes20.0% of failures

Brake failures cover worn pads and discs, an imbalance between wheels, corroded or scored discs, or a binding caliper. Braking efficiency is measured on a rolling road, so a spongy or pulling brake shows up as a low reading.

Suspension20.0% of failures

Suspension failures usually mean a worn or snapped coil spring, a leaking shock absorber, or play in a lower arm ball joint or bush. The tester checks for corrosion, fractures and excessive movement. A broken front spring is one of the most common failures on higher-mileage cars and is a straightforward replacement.

The parts that fix each

If your car has just failed, you have 10 working days to fix the items and get a free partial retest. These are the usual parts; confirm the exact fitment against your registration or VIN before buying.

For the steering failure: Horwin Ek1 steering track rod endsSearch Amazon for Horwin Ek1 steering track rod endsaffiliate searchFind Horwin Ek1 steering track rod ends on eBayaffiliate
For the tyres failure: Horwin Ek1 tyresSearch Amazon for Horwin Ek1 tyresaffiliate searchFind Horwin Ek1 tyres on eBayaffiliate
For the lamps & electrical failure: Horwin Ek1 headlight and indicator bulbsSearch Amazon for Horwin Ek1 headlight and indicator bulbsaffiliate searchFind Horwin Ek1 headlight and indicator bulbs on eBayaffiliate
For the brakes failure: Horwin Ek1 brake pads and discsSearch Amazon for Horwin Ek1 brake pads and discsaffiliate searchFind Horwin Ek1 brake pads and discs on eBayaffiliate
For the suspension failure: Horwin Ek1 suspension springs and shock absorbersSearch Amazon for Horwin Ek1 suspension springs and shock absorbersaffiliate searchFind Horwin Ek1 suspension springs and shock absorbers on eBayaffiliate

Other models

Horwin Ek1 Extended MOT failures13.7% failure rateHorwin Cr6 MOT failures17.3% failure rateHorwin Ek3 MOT failures11.2% failure rateFord Fiesta MOT failures27.1% failure rate

Sources: DVSA MOT History API: MOT test results and defect data ยท DVSA MOT testing data for Great Britain