Hillman Super Minx common MOT failures and failure rate
What a Hillman Super Minx fails its MOT on, from real DVSA test data, and the part that resolves each item.
Based on 2,182 MOT tests in DVSA data.
About 20.6% of MOT tests recorded on the Hillman Super Minx in DVSA data end in a failure. The same handful of items account for most of them.
Its most common failure is brakes, which makes up 47.3% of the Hillman Super Minx's failures, followed by brakes, suspension, lamps & electrical, visibility/wipers. Each item below links to the part that resolves it. Confirm the exact fitment against your registration or VIN before buying, and have safety-critical work done by a competent mechanic.
What it fails on, and why
Brake failures cover worn pads and discs, an imbalance between wheels, corroded or scored discs, or a binding caliper. Braking efficiency is measured on a rolling road, so a spongy or pulling brake shows up as a low reading.
Suspension failures usually mean a worn or snapped coil spring, a leaking shock absorber, or play in a lower arm ball joint or bush. The tester checks for corrosion, fractures and excessive movement. A broken front spring is one of the most common failures on higher-mileage cars and is a straightforward replacement.
Lighting is the single most common MOT failure and the cheapest to put right. A blown headlight, brake-light or number-plate bulb, a cracked lens, or a headlamp beam that points too high or low will all fail. Most are a two-minute bulb swap.
Visibility failures include torn or smearing wiper blades, a washer jet that does not reach the screen, and chips or cracks in the driver's swept area. Blades and washer fluid are quick, cheap fixes.
Exhaust failures cover leaks, insecure mountings and emissions over the limit. A blowing exhaust, a failed lambda reading or a diesel that smokes beyond the limit will fail.
Structural failures are corrosion in load-bearing areas, sharp edges, or insecure panels. These are inspection-and-welding jobs rather than a simple bolt-on part, so weigh them against the value of the car.
The parts that fix each
If your car has just failed, you have 10 working days to fix the items and get a free partial retest. These are the usual parts; confirm the exact fitment against your registration or VIN before buying.
Other models
Sources: DVSA MOT History API: MOT test results and defect data ยท DVSA MOT testing data for Great Britain