Know Your MOT
16.7%fail rate

Hillman Imp Californian common MOT failures and failure rate

What a Hillman Imp Californian fails its MOT on, from real DVSA test data, and the part that resolves each item.

Based on 396 MOT tests in DVSA data.

About 16.7% of MOT tests recorded on the Hillman Imp Californian in DVSA data end in a failure. The same handful of items account for most of them.

Its most common failure is brakes, which makes up 54.5% of the Hillman Imp Californian's failures, followed by brakes, lamps & electrical, suspension, other. Each item below links to the part that resolves it. Confirm the exact fitment against your registration or VIN before buying, and have safety-critical work done by a competent mechanic.

What it fails on, and why

Brakes54.5% of failures

Brake failures cover worn pads and discs, an imbalance between wheels, corroded or scored discs, or a binding caliper. Braking efficiency is measured on a rolling road, so a spongy or pulling brake shows up as a low reading.

Lamps & electrical37.9% of failures

Lighting is the single most common MOT failure and the cheapest to put right. A blown headlight, brake-light or number-plate bulb, a cracked lens, or a headlamp beam that points too high or low will all fail. Most are a two-minute bulb swap.

Suspension30.3% of failures

Suspension failures usually mean a worn or snapped coil spring, a leaking shock absorber, or play in a lower arm ball joint or bush. The tester checks for corrosion, fractures and excessive movement. A broken front spring is one of the most common failures on higher-mileage cars and is a straightforward replacement.

Other22.7% of failures

This covers a range of smaller items, from a non-working horn to a warning light left on.

Seat belts16.7% of failures

Seat-belt failures are frays, cuts, corroded anchorages, or a belt that will not lock under a sharp pull or retract properly.

Body & structure13.6% of failures

Structural failures are corrosion in load-bearing areas, sharp edges, or insecure panels. These are inspection-and-welding jobs rather than a simple bolt-on part, so weigh them against the value of the car.

The parts that fix each

If your car has just failed, you have 10 working days to fix the items and get a free partial retest. These are the usual parts; confirm the exact fitment against your registration or VIN before buying.

For the brakes failure: Hillman Imp Californian brake pads and discsSearch Amazon for Hillman Imp Californian brake pads and discsaffiliate searchFind Hillman Imp Californian brake pads and discs on eBayaffiliate
For the lamps & electrical failure: Hillman Imp Californian headlight and indicator bulbsSearch Amazon for Hillman Imp Californian headlight and indicator bulbsaffiliate searchFind Hillman Imp Californian headlight and indicator bulbs on eBayaffiliate
For the suspension failure: Hillman Imp Californian suspension springs and shock absorbersSearch Amazon for Hillman Imp Californian suspension springs and shock absorbersaffiliate searchFind Hillman Imp Californian suspension springs and shock absorbers on eBayaffiliate
For the seat belts failure: Hillman Imp Californian seat beltsSearch Amazon for Hillman Imp Californian seat beltsaffiliate searchFind Hillman Imp Californian seat belts on eBayaffiliate

Other models

Hillman Minx MOT failures18.7% failure rateHillman Imp Super MOT failures21.7% failure rateHillman Avenger MOT failures20.1% failure rateFord Fiesta MOT failures27.1% failure rate

Sources: DVSA MOT History API: MOT test results and defect data ยท DVSA MOT testing data for Great Britain