Know Your MOT
9.2%fail rate

Gas Gas Pro common MOT failures and failure rate

What a Gas Gas Pro fails its MOT on, from real DVSA test data, and the part that resolves each item.

Based on 131 MOT tests in DVSA data.

About 9.2% of MOT tests recorded on the Gas Gas Pro in DVSA data end in a failure. The same handful of items account for most of them.

Its most common failure is lamps & electrical, which makes up 33.3% of the Gas Gas Pro's failures, followed by lamps & electrical, other, registration plate, suspension. Each item below links to the part that resolves it. Confirm the exact fitment against your registration or VIN before buying, and have safety-critical work done by a competent mechanic.

What it fails on, and why

Lamps & electrical33.3% of failures

Lighting is the single most common MOT failure and the cheapest to put right. A blown headlight, brake-light or number-plate bulb, a cracked lens, or a headlamp beam that points too high or low will all fail. Most are a two-minute bulb swap.

Other25.0% of failures

This covers a range of smaller items, from a non-working horn to a warning light left on.

Registration plate16.7% of failures

A missing, damaged, dirty or incorrectly-spaced number plate, or one using the wrong font, will fail. A replacement plate is inexpensive.

Suspension8.3% of failures

Suspension failures usually mean a worn or snapped coil spring, a leaking shock absorber, or play in a lower arm ball joint or bush. The tester checks for corrosion, fractures and excessive movement. A broken front spring is one of the most common failures on higher-mileage cars and is a straightforward replacement.

Steering8.3% of failures

Steering faults are typically worn track-rod ends or ball joints, play in the rack, or a split gaiter letting grease out and dirt in. Excessive free play at the wheel fails.

Brakes8.3% of failures

Brake failures cover worn pads and discs, an imbalance between wheels, corroded or scored discs, or a binding caliper. Braking efficiency is measured on a rolling road, so a spongy or pulling brake shows up as a low reading.

The parts that fix each

If your car has just failed, you have 10 working days to fix the items and get a free partial retest. These are the usual parts; confirm the exact fitment against your registration or VIN before buying.

For the lamps & electrical failure: Gas Gas Pro headlight and indicator bulbsSearch Amazon for Gas Gas Pro headlight and indicator bulbsaffiliate searchFind Gas Gas Pro headlight and indicator bulbs on eBayaffiliate
For the registration plate failure: Gas Gas Pro number plateSearch Amazon for Gas Gas Pro number plateaffiliate searchFind Gas Gas Pro number plate on eBayaffiliate
For the suspension failure: Gas Gas Pro suspension springs and shock absorbersSearch Amazon for Gas Gas Pro suspension springs and shock absorbersaffiliate searchFind Gas Gas Pro suspension springs and shock absorbers on eBayaffiliate
For the steering failure: Gas Gas Pro steering track rod endsSearch Amazon for Gas Gas Pro steering track rod endsaffiliate searchFind Gas Gas Pro steering track rod ends on eBayaffiliate
For the brakes failure: Gas Gas Pro brake pads and discsSearch Amazon for Gas Gas Pro brake pads and discsaffiliate searchFind Gas Gas Pro brake pads and discs on eBayaffiliate

Other models

Gas Gas Ec MOT failures18.6% failure rateGas Gas Pampera MOT failures15.3% failure rateGas Gas Txt MOT failures11.2% failure rateFord Fiesta MOT failures27.1% failure rate

Sources: DVSA MOT History API: MOT test results and defect data ยท DVSA MOT testing data for Great Britain