Know Your MOT
12.1%fail rate

Ferrari 246gts common MOT failures and failure rate

What a Ferrari 246gts fails its MOT on, from real DVSA test data, and the part that resolves each item.

Based on 91 MOT tests in DVSA data.

About 12.1% of MOT tests recorded on the Ferrari 246gts in DVSA data end in a failure. The same handful of items account for most of them.

Its most common failure is lamps & electrical, which makes up 54.5% of the Ferrari 246gts's failures, followed by lamps & electrical, brakes, visibility/wipers, other. Each item below links to the part that resolves it. Confirm the exact fitment against your registration or VIN before buying, and have safety-critical work done by a competent mechanic.

What it fails on, and why

Lamps & electrical54.5% of failures

Lighting is the single most common MOT failure and the cheapest to put right. A blown headlight, brake-light or number-plate bulb, a cracked lens, or a headlamp beam that points too high or low will all fail. Most are a two-minute bulb swap.

Brakes36.4% of failures

Brake failures cover worn pads and discs, an imbalance between wheels, corroded or scored discs, or a binding caliper. Braking efficiency is measured on a rolling road, so a spongy or pulling brake shows up as a low reading.

Visibility/wipers27.3% of failures

Visibility failures include torn or smearing wiper blades, a washer jet that does not reach the screen, and chips or cracks in the driver's swept area. Blades and washer fluid are quick, cheap fixes.

Other27.3% of failures

This covers a range of smaller items, from a non-working horn to a warning light left on.

Suspension18.2% of failures

Suspension failures usually mean a worn or snapped coil spring, a leaking shock absorber, or play in a lower arm ball joint or bush. The tester checks for corrosion, fractures and excessive movement. A broken front spring is one of the most common failures on higher-mileage cars and is a straightforward replacement.

Seat belts9.1% of failures

Seat-belt failures are frays, cuts, corroded anchorages, or a belt that will not lock under a sharp pull or retract properly.

The parts that fix each

If your car has just failed, you have 10 working days to fix the items and get a free partial retest. These are the usual parts; confirm the exact fitment against your registration or VIN before buying.

For the lamps & electrical failure: Ferrari 246gts headlight and indicator bulbsSearch Amazon for Ferrari 246gts headlight and indicator bulbsaffiliate searchFind Ferrari 246gts headlight and indicator bulbs on eBayaffiliate
For the brakes failure: Ferrari 246gts brake pads and discsSearch Amazon for Ferrari 246gts brake pads and discsaffiliate searchFind Ferrari 246gts brake pads and discs on eBayaffiliate
For the visibility/wipers failure: Ferrari 246gts wiper bladesSearch Amazon for Ferrari 246gts wiper bladesaffiliate searchFind Ferrari 246gts wiper blades on eBayaffiliate
For the suspension failure: Ferrari 246gts suspension springs and shock absorbersSearch Amazon for Ferrari 246gts suspension springs and shock absorbersaffiliate searchFind Ferrari 246gts suspension springs and shock absorbers on eBayaffiliate
For the seat belts failure: Ferrari 246gts seat beltsSearch Amazon for Ferrari 246gts seat beltsaffiliate searchFind Ferrari 246gts seat belts on eBayaffiliate

Other models

Ferrari 360 MOT failures9.6% failure rateFerrari F430 MOT failures10.1% failure rateFerrari F355 MOT failures11.8% failure rateFord Fiesta MOT failures27.1% failure rate

Sources: DVSA MOT History API: MOT test results and defect data ยท DVSA MOT testing data for Great Britain