Know Your MOT
19.8%fail rate

Dinli 150 common MOT failures and failure rate

What a Dinli 150 fails its MOT on, from real DVSA test data, and the part that resolves each item.

Based on 86 MOT tests in DVSA data.

About 19.8% of MOT tests recorded on the Dinli 150 in DVSA data end in a failure. The same handful of items account for most of them.

Its most common failure is suspension, which makes up 23.5% of the Dinli 150's failures, followed by suspension, registration plate, brakes, other. Each item below links to the part that resolves it. Confirm the exact fitment against your registration or VIN before buying, and have safety-critical work done by a competent mechanic.

What it fails on, and why

Suspension23.5% of failures

Suspension failures usually mean a worn or snapped coil spring, a leaking shock absorber, or play in a lower arm ball joint or bush. The tester checks for corrosion, fractures and excessive movement. A broken front spring is one of the most common failures on higher-mileage cars and is a straightforward replacement.

Registration plate23.5% of failures

A missing, damaged, dirty or incorrectly-spaced number plate, or one using the wrong font, will fail. A replacement plate is inexpensive.

Brakes17.6% of failures

Brake failures cover worn pads and discs, an imbalance between wheels, corroded or scored discs, or a binding caliper. Braking efficiency is measured on a rolling road, so a spongy or pulling brake shows up as a low reading.

Other17.6% of failures

This covers a range of smaller items, from a non-working horn to a warning light left on.

Visibility/wipers11.8% of failures

Visibility failures include torn or smearing wiper blades, a washer jet that does not reach the screen, and chips or cracks in the driver's swept area. Blades and washer fluid are quick, cheap fixes.

Lamps & electrical11.8% of failures

Lighting is the single most common MOT failure and the cheapest to put right. A blown headlight, brake-light or number-plate bulb, a cracked lens, or a headlamp beam that points too high or low will all fail. Most are a two-minute bulb swap.

The parts that fix each

If your car has just failed, you have 10 working days to fix the items and get a free partial retest. These are the usual parts; confirm the exact fitment against your registration or VIN before buying.

For the suspension failure: Dinli 150 suspension springs and shock absorbersSearch Amazon for Dinli 150 suspension springs and shock absorbersaffiliate searchFind Dinli 150 suspension springs and shock absorbers on eBayaffiliate
For the registration plate failure: Dinli 150 number plateSearch Amazon for Dinli 150 number plateaffiliate searchFind Dinli 150 number plate on eBayaffiliate
For the brakes failure: Dinli 150 brake pads and discsSearch Amazon for Dinli 150 brake pads and discsaffiliate searchFind Dinli 150 brake pads and discs on eBayaffiliate
For the visibility/wipers failure: Dinli 150 wiper bladesSearch Amazon for Dinli 150 wiper bladesaffiliate searchFind Dinli 150 wiper blades on eBayaffiliate
For the lamps & electrical failure: Dinli 150 headlight and indicator bulbsSearch Amazon for Dinli 150 headlight and indicator bulbsaffiliate searchFind Dinli 150 headlight and indicator bulbs on eBayaffiliate

Other models

Dinli Dl801 MOT failures18.9% failure rateDinli 801 MOT failures22.3% failure rateDinli Dl MOT failures24.7% failure rateFord Fiesta MOT failures27.1% failure rate

Sources: DVSA MOT History API: MOT test results and defect data ยท DVSA MOT testing data for Great Britain