Know Your MOT
16.3%fail rate

Cupra Leon First common MOT failures and failure rate

What a Cupra Leon First fails its MOT on, from real DVSA test data, and the part that resolves each item.

Based on 564 MOT tests in DVSA data.

About 16.3% of MOT tests recorded on the Cupra Leon First in DVSA data end in a failure. The same handful of items account for most of them.

Its most common failure is tyres, which makes up 56.5% of the Cupra Leon First's failures, followed by tyres, suspension, other, brakes. Each item below links to the part that resolves it. Confirm the exact fitment against your registration or VIN before buying, and have safety-critical work done by a competent mechanic.

What it fails on, and why

Tyres56.5% of failures

Tyres fail for tread below the 1.6mm legal limit across the central three-quarters, uneven or exposed-cord wear, or sidewall damage. The tester inspects all four; a single illegal tyre is a fail.

Suspension19.6% of failures

Suspension failures usually mean a worn or snapped coil spring, a leaking shock absorber, or play in a lower arm ball joint or bush. The tester checks for corrosion, fractures and excessive movement. A broken front spring is one of the most common failures on higher-mileage cars and is a straightforward replacement.

Other13.0% of failures

This covers a range of smaller items, from a non-working horn to a warning light left on.

Brakes7.6% of failures

Brake failures cover worn pads and discs, an imbalance between wheels, corroded or scored discs, or a binding caliper. Braking efficiency is measured on a rolling road, so a spongy or pulling brake shows up as a low reading.

Lamps & electrical6.5% of failures

Lighting is the single most common MOT failure and the cheapest to put right. A blown headlight, brake-light or number-plate bulb, a cracked lens, or a headlamp beam that points too high or low will all fail. Most are a two-minute bulb swap.

Visibility/wipers4.3% of failures

Visibility failures include torn or smearing wiper blades, a washer jet that does not reach the screen, and chips or cracks in the driver's swept area. Blades and washer fluid are quick, cheap fixes.

The parts that fix each

If your car has just failed, you have 10 working days to fix the items and get a free partial retest. These are the usual parts; confirm the exact fitment against your registration or VIN before buying.

For the tyres failure: Cupra Leon First tyresSearch Amazon for Cupra Leon First tyresaffiliate searchFind Cupra Leon First tyres on eBayaffiliate
For the suspension failure: Cupra Leon First suspension springs and shock absorbersSearch Amazon for Cupra Leon First suspension springs and shock absorbersaffiliate searchFind Cupra Leon First suspension springs and shock absorbers on eBayaffiliate
For the brakes failure: Cupra Leon First brake pads and discsSearch Amazon for Cupra Leon First brake pads and discsaffiliate searchFind Cupra Leon First brake pads and discs on eBayaffiliate
For the lamps & electrical failure: Cupra Leon First headlight and indicator bulbsSearch Amazon for Cupra Leon First headlight and indicator bulbsaffiliate searchFind Cupra Leon First headlight and indicator bulbs on eBayaffiliate
For the visibility/wipers failure: Cupra Leon First wiper bladesSearch Amazon for Cupra Leon First wiper bladesaffiliate searchFind Cupra Leon First wiper blades on eBayaffiliate

Other models

Cupra Formentor MOT failures9.9% failure rateCupra Born MOT failures9.1% failure rateCupra Leon MOT failures13.7% failure rateFord Fiesta MOT failures27.1% failure rate

Sources: DVSA MOT History API: MOT test results and defect data ยท DVSA MOT testing data for Great Britain