Know Your MOT
15.5%fail rate

Can-Am Commander common MOT failures and failure rate

What a Can-Am Commander fails its MOT on, from real DVSA test data, and the part that resolves each item.

Based on 291 MOT tests in DVSA data.

About 15.5% of MOT tests recorded on the Can-Am Commander in DVSA data end in a failure. The same handful of items account for most of them.

Its most common failure is lamps & electrical, which makes up 31.1% of the Can-Am Commander's failures, followed by lamps & electrical, registration plate, suspension, steering. Each item below links to the part that resolves it. Confirm the exact fitment against your registration or VIN before buying, and have safety-critical work done by a competent mechanic.

What it fails on, and why

Lamps & electrical31.1% of failures

Lighting is the single most common MOT failure and the cheapest to put right. A blown headlight, brake-light or number-plate bulb, a cracked lens, or a headlamp beam that points too high or low will all fail. Most are a two-minute bulb swap.

Registration plate24.4% of failures

A missing, damaged, dirty or incorrectly-spaced number plate, or one using the wrong font, will fail. A replacement plate is inexpensive.

Suspension22.2% of failures

Suspension failures usually mean a worn or snapped coil spring, a leaking shock absorber, or play in a lower arm ball joint or bush. The tester checks for corrosion, fractures and excessive movement. A broken front spring is one of the most common failures on higher-mileage cars and is a straightforward replacement.

Steering15.6% of failures

Steering faults are typically worn track-rod ends or ball joints, play in the rack, or a split gaiter letting grease out and dirt in. Excessive free play at the wheel fails.

Visibility/wipers15.6% of failures

Visibility failures include torn or smearing wiper blades, a washer jet that does not reach the screen, and chips or cracks in the driver's swept area. Blades and washer fluid are quick, cheap fixes.

Seat belts13.3% of failures

Seat-belt failures are frays, cuts, corroded anchorages, or a belt that will not lock under a sharp pull or retract properly.

The parts that fix each

If your car has just failed, you have 10 working days to fix the items and get a free partial retest. These are the usual parts; confirm the exact fitment against your registration or VIN before buying.

For the lamps & electrical failure: Can-Am Commander headlight and indicator bulbsSearch Amazon for Can-Am Commander headlight and indicator bulbsaffiliate searchFind Can-Am Commander headlight and indicator bulbs on eBayaffiliate
For the registration plate failure: Can-Am Commander number plateSearch Amazon for Can-Am Commander number plateaffiliate searchFind Can-Am Commander number plate on eBayaffiliate
For the suspension failure: Can-Am Commander suspension springs and shock absorbersSearch Amazon for Can-Am Commander suspension springs and shock absorbersaffiliate searchFind Can-Am Commander suspension springs and shock absorbers on eBayaffiliate
For the steering failure: Can-Am Commander steering track rod endsSearch Amazon for Can-Am Commander steering track rod endsaffiliate searchFind Can-Am Commander steering track rod ends on eBayaffiliate
For the visibility/wipers failure: Can-Am Commander wiper bladesSearch Amazon for Can-Am Commander wiper bladesaffiliate searchFind Can-Am Commander wiper blades on eBayaffiliate
For the seat belts failure: Can-Am Commander seat beltsSearch Amazon for Can-Am Commander seat beltsaffiliate searchFind Can-Am Commander seat belts on eBayaffiliate

Other models

Can-Am Spyder MOT failures8.0% failure rateCan-Am Outlander MOT failures12.9% failure rateCan-Am Renegade MOT failures12.1% failure rateFord Fiesta MOT failures27.1% failure rate

Sources: DVSA MOT History API: MOT test results and defect data ยท DVSA MOT testing data for Great Britain