Know Your MOT
5.7%fail rate

Brp Can-Am Ryker common MOT failures and failure rate

What a Brp Can-Am Ryker fails its MOT on, from real DVSA test data, and the part that resolves each item.

Based on 995 MOT tests in DVSA data.

About 5.7% of MOT tests recorded on the Brp Can-Am Ryker in DVSA data end in a failure. The same handful of items account for most of them.

Its most common failure is lamps & electrical, which makes up 40.4% of the Brp Can-Am Ryker's failures, followed by lamps & electrical, brakes, registration plate, fuel system. Each item below links to the part that resolves it. Confirm the exact fitment against your registration or VIN before buying, and have safety-critical work done by a competent mechanic.

What it fails on, and why

Lamps & electrical40.4% of failures

Lighting is the single most common MOT failure and the cheapest to put right. A blown headlight, brake-light or number-plate bulb, a cracked lens, or a headlamp beam that points too high or low will all fail. Most are a two-minute bulb swap.

Brakes8.8% of failures

Brake failures cover worn pads and discs, an imbalance between wheels, corroded or scored discs, or a binding caliper. Braking efficiency is measured on a rolling road, so a spongy or pulling brake shows up as a low reading.

Registration plate5.3% of failures

A missing, damaged, dirty or incorrectly-spaced number plate, or one using the wrong font, will fail. A replacement plate is inexpensive.

Fuel system3.5% of failures

Fuel-system failures are leaks or an insecure filler cap.

Steering1.8% of failures

Steering faults are typically worn track-rod ends or ball joints, play in the rack, or a split gaiter letting grease out and dirt in. Excessive free play at the wheel fails.

Tyres1.8% of failures

Tyres fail for tread below the 1.6mm legal limit across the central three-quarters, uneven or exposed-cord wear, or sidewall damage. The tester inspects all four; a single illegal tyre is a fail.

Failure rate by year

How the MOT failure rate varies by the car's year of first registration (older examples generally fail more as wear sets in).

20195.3% fail · 318 tests
20206.9% fail · 291 tests
20215.1% fail · 236 tests

The parts that fix each

If your car has just failed, you have 10 working days to fix the items and get a free partial retest. These are the usual parts; confirm the exact fitment against your registration or VIN before buying.

For the lamps & electrical failure: Brp Can-Am Ryker headlight and indicator bulbsSearch Amazon for Brp Can-Am Ryker headlight and indicator bulbsaffiliate searchFind Brp Can-Am Ryker headlight and indicator bulbs on eBayaffiliate
For the brakes failure: Brp Can-Am Ryker brake pads and discsSearch Amazon for Brp Can-Am Ryker brake pads and discsaffiliate searchFind Brp Can-Am Ryker brake pads and discs on eBayaffiliate
For the registration plate failure: Brp Can-Am Ryker number plateSearch Amazon for Brp Can-Am Ryker number plateaffiliate searchFind Brp Can-Am Ryker number plate on eBayaffiliate
For the steering failure: Brp Can-Am Ryker steering track rod endsSearch Amazon for Brp Can-Am Ryker steering track rod endsaffiliate searchFind Brp Can-Am Ryker steering track rod ends on eBayaffiliate
For the tyres failure: Brp Can-Am Ryker tyresSearch Amazon for Brp Can-Am Ryker tyresaffiliate searchFind Brp Can-Am Ryker tyres on eBayaffiliate

Other models

Brp Can-Am Spyder MOT failures5.0% failure rateBrp Can-Am Outlander MOT failures11.7% failure rateBrp Can-Am Traxter MOT failures17.5% failure rateFord Fiesta MOT failures27.1% failure rate

Sources: DVSA MOT History API: MOT test results and defect data · DVSA MOT testing data for Great Britain