Know Your MOT
16.4%fail rate

Bmw M3 M3 common MOT failures and failure rate

What a Bmw M3 M3 fails its MOT on, from real DVSA test data, and the part that resolves each item.

Based on 61 MOT tests in DVSA data.

About 16.4% of MOT tests recorded on the Bmw M3 M3 in DVSA data end in a failure. The same handful of items account for most of them.

Its most common failure is suspension, which makes up 50.0% of the Bmw M3 M3's failures, followed by suspension, lamps & electrical, brakes, tyres. Each item below links to the part that resolves it. Confirm the exact fitment against your registration or VIN before buying, and have safety-critical work done by a competent mechanic.

What it fails on, and why

Suspension50.0% of failures

Suspension failures usually mean a worn or snapped coil spring, a leaking shock absorber, or play in a lower arm ball joint or bush. The tester checks for corrosion, fractures and excessive movement. A broken front spring is one of the most common failures on higher-mileage cars and is a straightforward replacement.

Lamps & electrical40.0% of failures

Lighting is the single most common MOT failure and the cheapest to put right. A blown headlight, brake-light or number-plate bulb, a cracked lens, or a headlamp beam that points too high or low will all fail. Most are a two-minute bulb swap.

Brakes30.0% of failures

Brake failures cover worn pads and discs, an imbalance between wheels, corroded or scored discs, or a binding caliper. Braking efficiency is measured on a rolling road, so a spongy or pulling brake shows up as a low reading.

Tyres20.0% of failures

Tyres fail for tread below the 1.6mm legal limit across the central three-quarters, uneven or exposed-cord wear, or sidewall damage. The tester inspects all four; a single illegal tyre is a fail.

Exhaust & emissions10.0% of failures

Exhaust failures cover leaks, insecure mountings and emissions over the limit. A blowing exhaust, a failed lambda reading or a diesel that smokes beyond the limit will fail.

Seat belts10.0% of failures

Seat-belt failures are frays, cuts, corroded anchorages, or a belt that will not lock under a sharp pull or retract properly.

The parts that fix each

If your car has just failed, you have 10 working days to fix the items and get a free partial retest. These are the usual parts; confirm the exact fitment against your registration or VIN before buying.

For the suspension failure: Bmw M3 M3 suspension springs and shock absorbersSearch Amazon for Bmw M3 M3 suspension springs and shock absorbersaffiliate searchFind Bmw M3 M3 suspension springs and shock absorbers on eBayaffiliate
For the lamps & electrical failure: Bmw M3 M3 headlight and indicator bulbsSearch Amazon for Bmw M3 M3 headlight and indicator bulbsaffiliate searchFind Bmw M3 M3 headlight and indicator bulbs on eBayaffiliate
For the brakes failure: Bmw M3 M3 brake pads and discsSearch Amazon for Bmw M3 M3 brake pads and discsaffiliate searchFind Bmw M3 M3 brake pads and discs on eBayaffiliate
For the tyres failure: Bmw M3 M3 tyresSearch Amazon for Bmw M3 M3 tyresaffiliate searchFind Bmw M3 M3 tyres on eBayaffiliate
For the exhaust & emissions failure: Bmw M3 M3 exhaustSearch Amazon for Bmw M3 M3 exhaustaffiliate searchFind Bmw M3 M3 exhaust on eBayaffiliate
For the seat belts failure: Bmw M3 M3 seat beltsSearch Amazon for Bmw M3 M3 seat beltsaffiliate searchFind Bmw M3 M3 seat belts on eBayaffiliate

Other models

Ford Fiesta MOT failures27.1% failure rateFord Focus MOT failures26.1% failure rateVauxhall Corsa MOT failures30.1% failure rateVauxhall Astra MOT failures28.1% failure rate

Sources: DVSA MOT History API: MOT test results and defect data ยท DVSA MOT testing data for Great Britain