Know Your MOT
13.4%fail rate

BMW Active Hybrid common MOT failures and failure rate

What a BMW Active Hybrid fails its MOT on, from real DVSA test data, and the part that resolves each item.

Based on 449 MOT tests in DVSA data.

About 13.4% of MOT tests recorded on the BMW Active Hybrid in DVSA data end in a failure. The same handful of items account for most of them.

Its most common failure is suspension, which makes up 30.0% of the BMW Active Hybrid's failures, followed by suspension, tyres, lamps & electrical, other. Each item below links to the part that resolves it. Confirm the exact fitment against your registration or VIN before buying, and have safety-critical work done by a competent mechanic.

What it fails on, and why

Suspension30.0% of failures

Suspension failures usually mean a worn or snapped coil spring, a leaking shock absorber, or play in a lower arm ball joint or bush. The tester checks for corrosion, fractures and excessive movement. A broken front spring is one of the most common failures on higher-mileage cars and is a straightforward replacement.

Tyres28.3% of failures

Tyres fail for tread below the 1.6mm legal limit across the central three-quarters, uneven or exposed-cord wear, or sidewall damage. The tester inspects all four; a single illegal tyre is a fail.

Lamps & electrical25.0% of failures

Lighting is the single most common MOT failure and the cheapest to put right. A blown headlight, brake-light or number-plate bulb, a cracked lens, or a headlamp beam that points too high or low will all fail. Most are a two-minute bulb swap.

Other13.3% of failures

This covers a range of smaller items, from a non-working horn to a warning light left on.

Visibility/wipers8.3% of failures

Visibility failures include torn or smearing wiper blades, a washer jet that does not reach the screen, and chips or cracks in the driver's swept area. Blades and washer fluid are quick, cheap fixes.

Brakes6.7% of failures

Brake failures cover worn pads and discs, an imbalance between wheels, corroded or scored discs, or a binding caliper. Braking efficiency is measured on a rolling road, so a spongy or pulling brake shows up as a low reading.

The parts that fix each

If your car has just failed, you have 10 working days to fix the items and get a free partial retest. These are the usual parts; confirm the exact fitment against your registration or VIN before buying.

For the suspension failure: BMW Active Hybrid suspension springs and shock absorbersSearch Amazon for BMW Active Hybrid suspension springs and shock absorbersaffiliate searchFind BMW Active Hybrid suspension springs and shock absorbers on eBayaffiliate
For the tyres failure: BMW Active Hybrid tyresSearch Amazon for BMW Active Hybrid tyresaffiliate searchFind BMW Active Hybrid tyres on eBayaffiliate
For the lamps & electrical failure: BMW Active Hybrid headlight and indicator bulbsSearch Amazon for BMW Active Hybrid headlight and indicator bulbsaffiliate searchFind BMW Active Hybrid headlight and indicator bulbs on eBayaffiliate
For the visibility/wipers failure: BMW Active Hybrid wiper bladesSearch Amazon for BMW Active Hybrid wiper bladesaffiliate searchFind BMW Active Hybrid wiper blades on eBayaffiliate
For the brakes failure: BMW Active Hybrid brake pads and discsSearch Amazon for BMW Active Hybrid brake pads and discsaffiliate searchFind BMW Active Hybrid brake pads and discs on eBayaffiliate

Other models

BMW 3 Series MOT failures24.9% failure rateBMW 118 Series MOT failures18.5% failure rateBMW X5 MOT failures22.7% failure rateFord Fiesta MOT failures27.1% failure rate

Sources: DVSA MOT History API: MOT test results and defect data ยท DVSA MOT testing data for Great Britain