Know Your MOT
11.4%fail rate

Beta Rev-3 common MOT failures and failure rate

What a Beta Rev-3 fails its MOT on, from real DVSA test data, and the part that resolves each item.

Based on 603 MOT tests in DVSA data.

About 11.4% of MOT tests recorded on the Beta Rev-3 in DVSA data end in a failure. The same handful of items account for most of them.

Its most common failure is registration plate, which makes up 18.8% of the Beta Rev-3's failures, followed by registration plate, lamps & electrical, other, tyres. Each item below links to the part that resolves it. Confirm the exact fitment against your registration or VIN before buying, and have safety-critical work done by a competent mechanic.

What it fails on, and why

Registration plate18.8% of failures

A missing, damaged, dirty or incorrectly-spaced number plate, or one using the wrong font, will fail. A replacement plate is inexpensive.

Lamps & electrical18.8% of failures

Lighting is the single most common MOT failure and the cheapest to put right. A blown headlight, brake-light or number-plate bulb, a cracked lens, or a headlamp beam that points too high or low will all fail. Most are a two-minute bulb swap.

Other17.4% of failures

This covers a range of smaller items, from a non-working horn to a warning light left on.

Tyres13.0% of failures

Tyres fail for tread below the 1.6mm legal limit across the central three-quarters, uneven or exposed-cord wear, or sidewall damage. The tester inspects all four; a single illegal tyre is a fail.

Suspension5.8% of failures

Suspension failures usually mean a worn or snapped coil spring, a leaking shock absorber, or play in a lower arm ball joint or bush. The tester checks for corrosion, fractures and excessive movement. A broken front spring is one of the most common failures on higher-mileage cars and is a straightforward replacement.

Brakes4.3% of failures

Brake failures cover worn pads and discs, an imbalance between wheels, corroded or scored discs, or a binding caliper. Braking efficiency is measured on a rolling road, so a spongy or pulling brake shows up as a low reading.

Failure rate by year

How the MOT failure rate varies by the car's year of first registration (older examples generally fail more as wear sets in).

20058.7% fail · 115 tests
20069.9% fail · 161 tests
200718.9% fail · 132 tests

The parts that fix each

If your car has just failed, you have 10 working days to fix the items and get a free partial retest. These are the usual parts; confirm the exact fitment against your registration or VIN before buying.

For the registration plate failure: Beta Rev-3 number plateSearch Amazon for Beta Rev-3 number plateaffiliate searchFind Beta Rev-3 number plate on eBayaffiliate
For the lamps & electrical failure: Beta Rev-3 headlight and indicator bulbsSearch Amazon for Beta Rev-3 headlight and indicator bulbsaffiliate searchFind Beta Rev-3 headlight and indicator bulbs on eBayaffiliate
For the tyres failure: Beta Rev-3 tyresSearch Amazon for Beta Rev-3 tyresaffiliate searchFind Beta Rev-3 tyres on eBayaffiliate
For the suspension failure: Beta Rev-3 suspension springs and shock absorbersSearch Amazon for Beta Rev-3 suspension springs and shock absorbersaffiliate searchFind Beta Rev-3 suspension springs and shock absorbers on eBayaffiliate
For the brakes failure: Beta Rev-3 brake pads and discsSearch Amazon for Beta Rev-3 brake pads and discsaffiliate searchFind Beta Rev-3 brake pads and discs on eBayaffiliate

Other models

Beta Rr MOT failures16.0% failure rateBeta Xtrainer MOT failures15.4% failure rateBeta Alp MOT failures15.8% failure rateFord Fiesta MOT failures27.1% failure rate

Sources: DVSA MOT History API: MOT test results and defect data · DVSA MOT testing data for Great Britain