Know Your MOT
8.8%fail rate

Austin 12/6 common MOT failures and failure rate

What a Austin 12/6 fails its MOT on, from real DVSA test data, and the part that resolves each item.

Based on 91 MOT tests in DVSA data.

About 8.8% of MOT tests recorded on the Austin 12/6 in DVSA data end in a failure. The same handful of items account for most of them.

Its most common failure is lamps & electrical, which makes up 50.0% of the Austin 12/6's failures, followed by lamps & electrical, suspension, brakes, tyres. Each item below links to the part that resolves it. Confirm the exact fitment against your registration or VIN before buying, and have safety-critical work done by a competent mechanic.

What it fails on, and why

Lamps & electrical50.0% of failures

Lighting is the single most common MOT failure and the cheapest to put right. A blown headlight, brake-light or number-plate bulb, a cracked lens, or a headlamp beam that points too high or low will all fail. Most are a two-minute bulb swap.

Suspension37.5% of failures

Suspension failures usually mean a worn or snapped coil spring, a leaking shock absorber, or play in a lower arm ball joint or bush. The tester checks for corrosion, fractures and excessive movement. A broken front spring is one of the most common failures on higher-mileage cars and is a straightforward replacement.

Brakes25.0% of failures

Brake failures cover worn pads and discs, an imbalance between wheels, corroded or scored discs, or a binding caliper. Braking efficiency is measured on a rolling road, so a spongy or pulling brake shows up as a low reading.

Tyres12.5% of failures

Tyres fail for tread below the 1.6mm legal limit across the central three-quarters, uneven or exposed-cord wear, or sidewall damage. The tester inspects all four; a single illegal tyre is a fail.

Other12.5% of failures

This covers a range of smaller items, from a non-working horn to a warning light left on.

Fuel system12.5% of failures

Fuel-system failures are leaks or an insecure filler cap.

The parts that fix each

If your car has just failed, you have 10 working days to fix the items and get a free partial retest. These are the usual parts; confirm the exact fitment against your registration or VIN before buying.

For the lamps & electrical failure: Austin 12/6 headlight and indicator bulbsSearch Amazon for Austin 12/6 headlight and indicator bulbsaffiliate searchFind Austin 12/6 headlight and indicator bulbs on eBayaffiliate
For the suspension failure: Austin 12/6 suspension springs and shock absorbersSearch Amazon for Austin 12/6 suspension springs and shock absorbersaffiliate searchFind Austin 12/6 suspension springs and shock absorbers on eBayaffiliate
For the brakes failure: Austin 12/6 brake pads and discsSearch Amazon for Austin 12/6 brake pads and discsaffiliate searchFind Austin 12/6 brake pads and discs on eBayaffiliate
For the tyres failure: Austin 12/6 tyresSearch Amazon for Austin 12/6 tyresaffiliate searchFind Austin 12/6 tyres on eBayaffiliate

Other models

Austin Mini 1000 MOT failures34.2% failure rateAustin Mini Mayfair MOT failures35.2% failure rateAustin MINI MOT failures24.8% failure rateFord Fiesta MOT failures27.1% failure rate

Sources: DVSA MOT History API: MOT test results and defect data ยท DVSA MOT testing data for Great Britain