Know Your MOT
14.4%fail rate

Austin 10 Cwt common MOT failures and failure rate

What a Austin 10 Cwt fails its MOT on, from real DVSA test data, and the part that resolves each item.

Based on 257 MOT tests in DVSA data.

About 14.4% of MOT tests recorded on the Austin 10 Cwt in DVSA data end in a failure. The same handful of items account for most of them.

Its most common failure is lamps & electrical, which makes up 56.8% of the Austin 10 Cwt's failures, followed by lamps & electrical, brakes, suspension, exhaust & emissions. Each item below links to the part that resolves it. Confirm the exact fitment against your registration or VIN before buying, and have safety-critical work done by a competent mechanic.

What it fails on, and why

Lamps & electrical56.8% of failures

Lighting is the single most common MOT failure and the cheapest to put right. A blown headlight, brake-light or number-plate bulb, a cracked lens, or a headlamp beam that points too high or low will all fail. Most are a two-minute bulb swap.

Brakes45.9% of failures

Brake failures cover worn pads and discs, an imbalance between wheels, corroded or scored discs, or a binding caliper. Braking efficiency is measured on a rolling road, so a spongy or pulling brake shows up as a low reading.

Suspension27.0% of failures

Suspension failures usually mean a worn or snapped coil spring, a leaking shock absorber, or play in a lower arm ball joint or bush. The tester checks for corrosion, fractures and excessive movement. A broken front spring is one of the most common failures on higher-mileage cars and is a straightforward replacement.

Exhaust & emissions18.9% of failures

Exhaust failures cover leaks, insecure mountings and emissions over the limit. A blowing exhaust, a failed lambda reading or a diesel that smokes beyond the limit will fail.

Visibility/wipers13.5% of failures

Visibility failures include torn or smearing wiper blades, a washer jet that does not reach the screen, and chips or cracks in the driver's swept area. Blades and washer fluid are quick, cheap fixes.

Other13.5% of failures

This covers a range of smaller items, from a non-working horn to a warning light left on.

The parts that fix each

If your car has just failed, you have 10 working days to fix the items and get a free partial retest. These are the usual parts; confirm the exact fitment against your registration or VIN before buying.

For the lamps & electrical failure: Austin 10 Cwt headlight and indicator bulbsSearch Amazon for Austin 10 Cwt headlight and indicator bulbsaffiliate searchFind Austin 10 Cwt headlight and indicator bulbs on eBayaffiliate
For the brakes failure: Austin 10 Cwt brake pads and discsSearch Amazon for Austin 10 Cwt brake pads and discsaffiliate searchFind Austin 10 Cwt brake pads and discs on eBayaffiliate
For the suspension failure: Austin 10 Cwt suspension springs and shock absorbersSearch Amazon for Austin 10 Cwt suspension springs and shock absorbersaffiliate searchFind Austin 10 Cwt suspension springs and shock absorbers on eBayaffiliate
For the exhaust & emissions failure: Austin 10 Cwt exhaustSearch Amazon for Austin 10 Cwt exhaustaffiliate searchFind Austin 10 Cwt exhaust on eBayaffiliate
For the visibility/wipers failure: Austin 10 Cwt wiper bladesSearch Amazon for Austin 10 Cwt wiper bladesaffiliate searchFind Austin 10 Cwt wiper blades on eBayaffiliate

Other models

Austin Mini 1000 MOT failures34.2% failure rateAustin Mini Mayfair MOT failures35.2% failure rateAustin MINI MOT failures24.8% failure rateFord Fiesta MOT failures27.1% failure rate

Sources: DVSA MOT History API: MOT test results and defect data ยท DVSA MOT testing data for Great Britain